Quote:
引用第6楼沐风于2006-09-30 11:54发表的“”:
NeoMagic MagicGraph 256ZX
这个芯片的
机子太老
找不到驱动
让他扔了
.......
在DELL网站找到了
http://support.ap.dell.com/support/downloads/format.aspx?releaseid=R22241&c=cn&l=zh&cs=&s=genThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation:
Windows 95 Display Driver Installation Procedure
1)Click Start, point to Settings, and click Control Panel.
2)Double-click the Display icon.
3)Click Settings [tab] and then click Advanced Properties.
4)Select the Adapter tab and click Change.
5)Click Have Disk and then click OK.
6)Specify the path to the new driver in one of the following ways and then press :
Example 1: Enter A:\.
Example 2: Type in the name of the directory to which you copied the drivers, either on your local hard drive or on a network share.
Example 3: If you're not sure exactly where the drivers are, choose the Browse... button to find them.
7)At the Select Device dialog box, select the adapter that corresponds to the one you installed on your system and click OK.
8)Windows copies the drivers to the appropriate directories on your system.
9)Continue clicking Close until you are prompted to restart the system.
10)Restart the system.
11)After you restart the system, you can return to the Display icon and select alternate screen resolutions and color depths.
Windows 98 Display Driver Installation Procedure
1)Click Start, point to Settings, and click Control Panel.
2)Double-click the Display icon.
3)Click Settings [tab] and then click Advanced {button}.
4)Click the Adapter tab, and then click Change.
5)The Update Device Driver Wizard appears and NeoMagic MagicGraph 256AV is selected.
6)Click Next, click Search for a better driver than the one your device is using now (Recommended), and then click Next.
7)The Update Device Wizards displays a message asking where to search for the new driver.
8)Specify the path to the new driver in one of the following ways and then press :
Example 1: If installing from the floppy drive, leave only the Floppy drive box checked, all others should be unchecked.
Example 2: If installing from the hard drive, uncheck the Floppy drive box, then check the Specify a location box, click the Browse button. Type in the name of the directory to which you copied the drivers, either on your local hard drive or on a network share.
9)Click Next to select the driver in the directory selected above.
10)Select Install one of the drivers, click on View List.
11)Verify the driver called
NeoMagic MagicMedia 256ZX is highlighted and click OK.
12)Click Next to begin copying the files.
The following message is displayed: Please insert the disk labeled 'Win95 NeoMagic Driver Disk', click OK.
13)If a Copying Files screen appears, click Browse.
14)Select the same directory mentioned in step 6, and click OK.
15)When prompted, click Finish to install the NeoMagic driver.
16)When prompted to reboot the computer, click Yes.
After you restart the system, you can return to the Display icon and select alternate screen resolutions and color depths.
[ 此贴被送开水的在2006-09-30 13:11重新编辑 ]
